3M™High Performance 9088FL

9088FL_photo

3M™ High Performance Double Coated Tape 9088FL is a 8.3 mil double coated tape with Adhesive 375 polyester carrier 0.5 mil tape is clear in color on a red polypropylene film liner no print.

– 8.3 mil, thick double coated tape with a PET, polyester, carrier. This tape with adhesive on both sides of a thin, flexible PET carrier for easy handling. Film liner.
– Thick, double coated film tape with acrylic adhesive. High tack, immediate bond, quick stick, high adhesion and good initial adhesion to a wide variety of materials or surfaces. High strength. Solvent resistant tape. High peel and shear strength, and resi
– Two sided tape can bond smooth, rough or textured surfaces. Bonds to a wide variety of materials, surfaces and substrates. Versatile, cost effective tape for multiple applications across many industries. Clean, uniform consistent applications with differe

Shelf Life Technical Bulletin

3M™High Performance 9088FL
Holds tight to bond on contact to almost any high and low surface energy substrate. Initial high tack. Use for POP displays, name plates, and metal fabrication
Adhesion to Foam: 2
Adhesion to HSE: 8
Adhesion to LSE: 6
Adhesion to Metal: 8
Adhesive Peel Initia:l 6
Adhesive Peel Ultimate: 8
Adhesive Tack Level: High
Adhesive Type: Acrylic
Back-Side Adhesive Thickness: 3.9 mil
Back-Side Adhesive Type: 3M™ High Performance Adhesive 375
Brand: 3M
Carrier Color: Clear
Carrier Material: Polyester Film (PET)
Carrier Thickness: 0.5 mil
Chemical Resistance: 7
Color: Clear
Face-Side Adhesive Thickness: 3.9 mil
Face-Side Adhesive Type: 3M™ High Performance Adhesive 375
Humidity Resistance: High
Industries: General Industrial, Signage, Point of Purchase, Converter Solutions
Length: 55 Linear Yard
Length (Metric): 50.29 m
Master Size Length: 165 Linear Yard
Master Size Width: 54 Inch
Moisture Resistance: High
Plasticizer Resistance: Medium
Primary Liner: Polypropylene (PP)
Primary Liner Color: Red
Product Form: Roll
Shear Strength at 72 Degrees F (22 Degrees C): High
Size: Custom
Temp Resistance-- Lower (deg F): -40 Degree Fahrenheit
Temp Resistance -- Upper (deg F): 300 Degree Fahrenheit
Total Thickness: 11.4 mil
UV Resistance: Medium
Width: 1 Inch
Width (Metric): 25.4 mm

 Technical Data

 Technical Data