3M™ Scotchprint® 1080
Scotchprint® Wrap Film Series 1080 are long-term, removable, dual cast films designed for solid color vehicle detailing, decoration and full wraps without the need of additional graphic protection.
These vinyl films are sold in 1.52 m wide rolls, allowing almost any section of a vehicle to be wrapped without seams.
The films provide excellent opacity to hide high contrast surfaces and are shortly resistant against petrol spillage and extremely resistant to all atmospheric influence.
Controltac™ technology is a mechanical feature out of millions of glass spheres on top of the adhesive surface. This minimizes the initial contact area of the adhesive and allows the applicator to reposition the graphic during application.
This effects easier installation of large formats in a wide temperature range.
Comply™ are air release channels in the adhesive for fast and easy, bubble-free graphic installations.
3M™ Scotchprint® 1080 | |
---|---|
Material: cast vinyl Surface finish: matte, textured surface Thickness (film): 90 μm (0.09 mm) Adhesive type: solvent acrylic, pressure-sensitive, repositionable Adhesive appearance: grey Liner: double-sided Polyethylene coated paper Adhesion: 20 N/25 mm FTM 1: 180° peel, substrate: glass; cond: 24 h 23°C/50%RH Additonal reference: Automotive paint: 11 N/25 mm - 22 N/25 mm Application method: dry only! Applied shrinkage: < 0.4 mm FTM 14 Application temperature: +16°C minimum (air and substrate) Service temperature: -60°C to +107°C Surface type: flat to simple curved and moderate compound curves typical to personal vehicles Substrate type: aluminum, glass, PMMA, PC*, ABS, paint PC*: Polycarbonates might require drying with heat before use Graphic removal: Fair to remove with heat and/or chemicals from supported substrates No liability is given for ease or speed of removal of any graphic. Pay attention to adequate air and substrate temperature. |